the queen of quality sunflower oil extruder in cameroon
- Usage: Sunflower processing machine
- Type: Sunflower processing machine
- Production Capacity: 50T-100T/D
- Model Number: Qie-0310
- Voltage: 220V/380V
- Power(W): 11KW
- Dimension(L*W*H): 2300*1650*1600mm
- Weight: 1200 KG
- Certification: CE, BV,ISO9001
- Item: Sunflower processing machine
- Raw material: Sunflower Seed
- Waste Bleaching Earth Oil Content: 25% to 35 %
- Electric Consumption: 28Kwh/T Oil
- Soften Water: 150Kg/T Oil
- Phosphoric Acid: 2~3 kg/T Oil
- Bleaching Earth Consumption: 80-500KG/T Oil
- Supplier Type: Manufacturer
- Origin: China
Extraction of sunflower oil by twin screw extruder: Screw
The extracted oil had an excellent quality for all profiles (Table 1). The modification of screw configuration did not change oil quality. The acid value remained stable at less than 2 mg of KOH/g of oil. The iodine and saponification values were tolerable (84–85 g of iodine/100 g of oil and 190–208 mg of KOH/g of oil, respectively
A new process, in which sunflower seeds are pressed in a twin-screw extruder, is examined here. The screw profile was first optimized. Oleic sunflower seeds were crushed and 80% of the oil was removed. The resultant oil was of good quality, with acid numbers below 2 mg KOH/g of oil and total phosphorus contents of about 100 ppm.
Twin-screw extruder for oil processing of sunflower seeds
In the case of oil extraction of sunflower seeds using a CLEXTRAL BC 45 co-rotating twin-screw extruder, the screw configuration and the operating conditions had an important influence on the oil extraction yield, the energy input and the quality of oil extracted (Amalia Kartika et al., 2006).
DOI: 10.1016/J.INDCROP.2010.05.005 Corpus ID: 98652016; Twin-screw extruder for oil processing of sunflower seeds: Thermo-mechanical pressing and solvent extraction in a single step
A Twin-Screw Extruder for Oil Extraction: I. Direct
The oil content of the oleic sunflower seeds used in the second set of tests was 50.9% in relation to the dry matter. The seed moisture content was modified by oven-drying at
Highest oil extraction yield (85%) with best cake meal quality (residual oil content lower than 13%) was obtained under operating conditions of 120 degrees C, 75 rpm and 19 kg/h. Furthermore, the
A twin-screw extruder for oil extraction: II. Alcohol
Our work is about the extraction of sunflower seed oil in a twin-screw extruder with or without the injection of 2-ethylhexanol and acidified 2-ethylhexanol. 2-Ethylhexanol is mixed with phosphoric acid. The oil recovery is increased to 90% by the co-injection of acidified alcohol. Mixing phosphoric acid with the alcohol enhances the lability of the oily spherosomes. Its addition increases the
A new process, in which sunflower seeds are pressed in a. twin-screw extruder, is examined here. The screw profile was. first optimized. Oleic sunflower seeds were crushed and 80% of. the oil