tunisia sunflower oil solvent extruder in rwanda
- Usage: Cooking Oil
- Type: Sunflower Oil Extraction Machine
- Production Capacity: 200kg/h
- Voltage: 220V
- Dimension(L*W*H): 375 * 160 * 275 (mm)
- Weight: 100kg
- Core Components: Motor
- Oil type: Sunflower Oil
- Product name: Sunflower oil processing Sunflower oil extraction machine
- Product Type: Sunflower Oil Extraction Machine
- Product function: extraction oil from Sunflower
- Power: 0.6kw
- Processing: 13 (kg/h)
- Squeezer diameter: 20 (mm)
- Squeezer speed: 56(r/min)
- spiral: 30 to 60 (%)
- The power supply voltage: 110/220 (V)
- Dry cake residual oil percentage: 5 (%)
Twin-screw extruder for oil processing of sunflower seeds: Thermo
A new application of twin-screw extruder as a machine to conduct a thermo-mechanical pressing and a solvent extraction of sunflower oil in a single step and in a continuous mode was studied. Experiments were conducted using a CLEXTRAL BC 45 co-rotating twin-screw extruder and whole sunflower seeds with fatty acid methyl esters as a solvent.
DOI: 10.1016/J.BIORTECH.2005.10.034 Corpus ID: 43736354; Extraction of sunflower oil by twin screw extruder: screw configuration and operating condition effects. @article{Kartika2006ExtractionOS, title={Extraction of sunflower oil by twin screw extruder: screw configuration and operating condition effects.}, author={I. Amalia Kartika and Pierre-Yves Pontalier and Luc Rigal}, journal
Twin-screw extruder for oil processing of sunflower seeds: Thermo
The fatty acid methyl esters extraction of sunflower oil using a CLEXTRAL BC 45 co-rotating twin-screw extruder increased oil extraction yield up to 96% and decreased residual oil content in cake meal below 5% under solvent-to-solid ratio of 0.70 (Amalia Kartika et al., 2003).
The oil levels remaining in the cake can be reduced to less than 2% by solvent extraction. However, the crude oil has to be refined as it contains many impurities and approximately 600 ppm phosphorus. A new process, in which sunflower seeds are pressed in a twin-screw extruder, is examined here. The screw profile was first optimized.
Extraction of sunflower oil by twin screw extruder: Screw configuration
Furthermore, an investigation of continuous oil extraction using an extruder divided into two zones, (i) twin-screw zone, which was built from two co-rotating and co-penetrating screws and (ii) double single-screw zone, which was constructed from two co-rotating single-screws, increased oil yield up to 90% with residual oil content in cake meal lower than 15% (Bouvier and Guyomard, 1997).
The simultaneous operation of mechanical pressing and solvent extraction in a single step on oil processing of sunflower seeds by a twin-screw extruder positively affected the oil extraction yield and the specific mechanical energy (SME). The injection of methyl ester in module 5 improved the oil recovery and decreased the SME (Figure 2).
Extraction of sunflower oil by twin screw extruder: Screw
The objective of this study was to investigate the screw configuration allowing oil extraction from sunflower seeds with a twin-screw extruder. Experiments were conducted using a co-rotating twin
DOI: 10.1016/J.INDCROP.2010.05.005 Corpus ID: 98652016; Twin-screw extruder for oil processing of sunflower seeds: Thermo-mechanical pressing and solvent extraction in a single step
